Table Edge Profiles


¼″ KrystalCast on 1″ MDF or 1″ Baltic Birch Ply

  • Tables & countertops using ¼″ KrystalCast on 1″ MDF or 1″ Baltic Birch Ply will have a flat edge, 45º or 60º knife edge.
  • ¼″ KrystalCast is bonded to a balanced MDF.

Flat on 1″ MDF or Baltic Birch Ply sub-top


Lower Knife on  1″ MDF or Baltic Birch Ply (45º) sub-top


Lower Knife on  1″ MDF or Baltic Birch Ply (60º) sub-top

¾″ or 1″ Solid KrystalCast on 1″ MDF sub-top

  • Conference tables can be made with 1″ MDF or Baltic Birch Ply.

Flat Edge – resin color on bottom  ¾″ or 1″ MDF sub-top


Waterfall Edge – resin color on bottom ¾″ or  1″ MDF (45º) sub-top


Bullnose Edge – resin color in center ¾″ or  1″ MDF (60º) sub-top

Solid KrystalCast on Baltic Birch Ply sub-top

Undercut Knife Edge (45º or 60º)
- resin color on bottom  ¾″ or 1″
Baltic Birch Ply sub-top


Top cut knife edge (45º or 60º)
- resin color on bottom  ¾″ or 1″
Baltic Birch Ply sub-top


Flat Edge KCX*  ¾″ or 1″
Baltic Birch Ply sub-top


Top Bevel Edge KCX*  ¾″ or 1″
Birch Ply sub-top


Under Cut Knife Edge KCX* (45º or 60º)  ¾″ or 1″
Baltic Birch Ply sub-top

Waterfall Edge KCX*  ¾″ or 1″
Baltic Birch Ply sub-top
*exterior use